26 port 24 PoE port Switch Hik-vision DS-3E1528HP-SI-24P2T2F
Product Code: SWITCH1528HPSI24P2T
The photo is for illustration only. Please refer to the description for exact product specifications.
Warehouse in Europe
94%+ positive feedback
30 day money back guarantee
Product description
26 port 24 PoE port Switch Hik-vision DS-3E1528HP-SI-24P2T2F
Specifications
Supplier product description
- 24 × gigabit PoE ports, and 2 × gigabit fiber optical ports.
- IEEE 802.3at/af standard for PoE ports.
- Network topology management, alarm push, network health monitor.
- 6 KV surge protection for PoE ports.
- AF/AT camera can reach up to 300 m in extend mode.
- PoE watchdog to auto detect and restart the cameras that do not respond.
- Various layer 2 management protocols such as STP/RSTP, VLAN, link aggregation, SNMP, QoS and so on.
- Approval
- ChemistryCE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)
- EMCCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020),IC (ICES-003: Issue 7:2020),RCM (AS/NZS CISPR 32: 2015)
- SafetyCB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition)), CE-LVD (EN 62368-1: 2014+A11: 2017)
- General
- Dimensions (W × H × D)440 mm × 44 mm × 220.8 mm (17.32'' × 1.73'' × 8.69'')
- Gross Weight3.535 kg (7.79 lb)
- Installation ModeDesk-Mounted,Rack (equipped with mounting ears)
- Max. Power Consumption400 W
- Net Weight2.975 kg (6.56 lb)
- Operating Humidity5% to 95% (no condensation)
- Operating Temperature0 °C to 45 °C (0 °F to 113 °F)
- Power Consumption in Idle30 W
- Power Supply100-240V~ 50/60Hz 6.3 A
- Relative Humidity5% to 95% (no condensation)
- ShellMetal material
- Storage Temperature-40 °C to 85 °C (-40 °F to 185 °F)
- Surge Protection6 KV
- Network Parameters
- Internal Cache4.1 Mbits
- MAC Address Table8 K
- Packet Forwarding RateWhole-Device Performance: 41.66 MppsPort Performance: 41.66 Mpps
- Ports24 × Gigabit PoE port,2 × Gigabit RJ45 port,2 × Gigabit fiber optical port
- Switching CapacityWhole-Device Performance: 56 GbpsPort Performance: 56 Gbps
- PoE Power Supply
- Max. Port PowerPorts 1 to 4: 90 WPorts 5 to 24: 30 W
- PoE PortHi-PoE: Ports 1 to 4PoE: Ports 5 to 24
- PoE Power Budget370 W
- PoE Power PinPorts 1 to 4: 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)Ports 5 to 24: End-span: 1/2(-), 3/6(+)
- PoE StandardPorts 1 to 4: IEEE 802.3af, IEEE 802.3at, IEEE 802.3btPorts 5 to 24: IEEE 802.3af, IEEE 802.3at
- Software Function
- ACLPort security strategy.Support up to 64 ACL entries.Support up to 128 configuration rules under all ACL entries.
- DHCP SnoopingDHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through. Disabled by default.
- HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported:1. Display the port rate.2. Display the port bandwidth utilization rate.3. Display the PoE power usage.4. Display topology information.5. Display the alarm status.6. Restart ports and devices.7. Enable port long-rage mode.8. Remotely upgrade the device.
- IPSGIPSG can control the security of port access device.Support port, MAC, IP binding.Support 256 security entries.
- Link AggregationLink aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection.Support static link aggregation.Support 8 aggregation groups.
- Long RangePorts 1 to 24: up to 300 m.Long range performance may vary depend on camera model or cable condition.
- Loop PreventionLoop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.Support 802.1D STP.Suppport 802.1w RSTP.
- PoE WatchdogPorts 1 to 24: auto detect and restart the cameras that do not respond.
- Port IsolationPorts 1 to 28: port isolation mode to improve network securityPorts in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
- Port Rate-Limiting Port rate-limiting is used for port bandwidth adjustment to prevent network congestion.
- QoSQoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance.Support port-based priority configuration.Support SP, WRR priority schedule mode.
- Storm ControlStorm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication.Support port rate limiting based on broadcast, multicast, and unknown unicast packets.
- System MaintenanceSupport device management via web.Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.Support management via Hik-Central Pro.Support remote management via Hik-Partner Pro.Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.Supports 802.1ab LLDP for peer device discovery.Support SNMP v1/v2c for third-party management platform access.Support port mirroring for fault locating.
- VLANVLAN is used for network scale planning and network health improvement.Support 802.1Q.Configurable VLAN ID from 1-4094.Support Trunk, Access port mode.Support Max. 4094 VLAN.
Supplier parameters
Product code
SWITCH1528HPSI24P2T
Product ID
U-4900264
Category
Swit
Brand
Hikvision
Supplier's product code
SWITCH1528HPSI24P2T
The information that supplier provides may differ from the actual product. If you noticed an error please let us know by email: .